Past+Sketchup

@http://sketchup.google.com/intl/en/training/videos/new_to_gsu.html

Good Things to Remember:

SketchUp videos
 * 1) Don't cross edges (lines). Just go TO lines.
 * 2) Pushing and pulling only works on a co-planer surface (flat).
 * 3) Enter a number after pushing or pulling along with the units to change the depth.
 * 4) Infer push or pull of more than one shape.
 * 5) When you need to delete a number of steps hold the ALT key and keep hitting the BACKSPACE key.
 * 6) //Zoom, pan and orbit.//
 * 7) //When on an edge, the pencil dot is red, green (end), cyan (middle), or black (on two edges).//
 * 8) //You need to have a closed shape on ONE plane (co-planer) to create a face. (Red, green or blue directions)//
 * 9) //You can create a face by connecting and completing edges. (Known as 'healing a surface'.)//

1.[|Introduction to Zoom, Pan, Orbit]

Try it: Draw, then Push and Pull

2.[|A more modern version of this same video]

3.[|But where do I begin?]

4.__ [|Edges and Faces] __

Making Edges (1-D, line objects)

Making Faces (2-D, flat objects)

5.__ [|Using the Axis] __

Drawing What You REALLY Want

6. [|Drawing a Doghouse]

7.[|Making a House]

8. . **"Folding"** edges. Selections

media type="custom" key="13087458"

Using the measuring tape and **inferences**. media type="custom" key="13087474" media type="custom" key="13087488"

//Have you tried a chair yet?// media type="custom" key="13087494"

If you're really getting good at figuring this out, you might want to see what else you can do: click here

Have you tried:

** * **Text?

** * **Rotate? Here's some help.

** * **Animate? Video 1 Video 2 Video 3

Past SketchUp videos

1.[|Introduction to Zoom, Pan, Orbit] Try it: Draw, then Push and Pull 2.[|A more modern version of this same video] 3.[|But where do I begin?] 4.__ [|Edges and Faces] __ Making Edges (1-D, line objects) Making Faces (2-D, flat objects) 5.__ [|Using the Axis] __ Drawing What You REALLY Want 6. [|Drawing a Doghouse] 7.[|Making a House] 8. . **"Folding"** edges.

@http://sketchup.google.com/intl/en/training/videos/new_to_gsu.html

Good Things to Remember:
 * 1) Don't cross edges (lines). Just go TO lines.
 * 2) Pushing and pulling only works on a co-planer surface (flat).
 * 3) Enter a number after pushing or pulling along with the units to change the depth.
 * 4) Infer push or pull of more than one shape.
 * 5) When you need to delete a number of steps hold the ALT key and keep hitting the BACKSPACE key.
 * 6) //Zoom, pan and orbit.//
 * 7) //When on an edge, the pencil dot is red, green (end), cyan (middle), or black (on two edges).//
 * 8) //You need to have a closed shape on ONE plane (co-planer) to create a face. (Red, green or blue directions)//
 * 9) //You can create a face by connecting and completing edges. (Known as 'healing a surface'.)//

Have you tried: ** * **Text? ** * **Rotate? Here's some help. ** * **Animate? Video 1 Video 2 Video 3

Sketch Up Previous Tutorials:

3. FreeForm media type="custom" key="13087498" 4. Follow Me media type="custom" key="13087504"

Components and Groups Components: media type="custom" key="13087508"